Local foundation and crawl space specialists in Kentucky, Tennessee and the Southeast Call 800-800-2220™
myfoundation.solutions

Crawl Space Support Jacks

Adjustable steel supports on solid footings that replace failing piers and lift sagging floors back toward level.

Why crawl space floors sag

The floor in a crawl space home rests on beams, and the beams rest on piers. When those piers sink, crack or rot, or are spaced too far apart, the beam sags between them and the floor above dips. Many older homes were built with block piers on shallow footings, or wood posts sitting right on the dirt.

How support jacks fix it

An adjustable steel support jack is a heavy-duty threaded steel post set on an engineered footing. Installed under the beam, it carries the load down to the footing and can be tightened to lift the floor.

A typical installation

  1. The crawl space is inspected and floor levels are measured upstairs.
  2. Where the original beam is undersized or damaged, a new supplemental beam is installed under the joists.
  3. Footings are placed on prepared, compacted base: composite footing pads or poured concrete, depending on the system.
  4. Steel jacks are set at close spacing under the beam.
  5. The jacks are tightened gradually to lift the floor without cracking finishes upstairs.

Why it matters to fix moisture too

Supports fix the structure, but if the crawl space stays wet, wood keeps weakening and soil keeps softening. The best results pair support jacks with encapsulation and humidity control.

Questions homeowners ask

Can the floor be lifted perfectly level?

Usually close, but old homes have settled for decades and finishes have adjusted. Lifting is done slowly, and a little may be left to avoid cracking plaster or tile.

Field note from Shaun Miller: Under the beam, look for real footings, not stacked block on dirt. On our jobs that means composite footing pads at least 24 inches across, set on compacted gravel or sand, with jacks close enough together that the beam can’t sag between them. Where the original beam is undersized, we add a supplemental beam, typically built up from three 2x8s.

The longer it waits, the bigger the repair.

Get a free estimate from a local specialist.

Get a free estimate