There’s no single fix for every house. The right repair depends on what’s moving, what the house sits on and how deep solid ground is. A good specialist will explain why a method fits your home and the others don’t.
Foundation repair
- Steel Push Piers: Steel piers driven down to bedrock or load-bearing soil using the weight of the house itself. The most common permanent fix for a settling foundation.
- Helical Piers: Steel shafts with screw-like plates that are turned into the ground like a giant screw. Ideal for lighter structures, porches and new additions.
- Slab Piers: Piers installed through the floor of a slab home to stabilize and lift interior concrete that has settled.
- Lifting a Settled House: How a settled house is lifted back toward level: measuring, piering, lifting together and protecting the finishes.
- Wall Anchors: Steel plates inside and buried anchors outside, connected by a rod, to hold bowing basement walls in place and straighten them over time.
- Helical Tiebacks: Screw-type anchors installed through the wall from inside the basement, with no digging in the yard, to restrain walls under soil pressure.
- Steel Wall Braces: Vertical steel beams anchored to the floor and the framing above, used to hold bowing basement walls when outside anchors aren't possible.
- Concrete Crack Injection: Epoxy and polyurethane injection to seal leaking cracks in poured concrete walls, and when it's the right fix.
- Micropiles: Small-diameter, drilled and grouted piles for heavy loads, tight access and difficult soils like karst and rocky fill.
- Soil Nail Walls and Slope Stabilization: Reinforcing steel bars drilled into a slope or excavation to stabilize the soil itself. Used for retaining walls, hillsides and deep cuts.
- Piers for New Construction: Installing piers before a home or addition is built, so it never settles in the first place.
Waterproofing
- Gutters, Downspouts and Grading: Gutters, downspout extensions, grading and yard drains: the cheapest and most overlooked part of keeping a foundation dry.
- Interior Drain Systems: A perimeter drain installed under the basement floor that collects water before it reaches you and sends it to a sump pump.
- Sump Pump Systems: How a sump system works, what separates a good one from a cheap one, and where the water should go.
- Battery Backup Sump Pumps: Storms knock out power exactly when your sump pump is needed most. A battery backup keeps it running.
- Sealed Sump Lids: An open sump pit pours moisture, odors and soil gases into your home. A sealed, airtight lid fixes that.
- Basement Dehumidifiers: Why a hardware-store dehumidifier often isn't enough, and what to look for in one that keeps a basement dry year-round.
Crawl space repair
- Crawl Space Drainage: Perimeter drains and sealed sumps that keep water from collecting under your home before it's encapsulated.
- Crawl Space Vapor Barriers: The difference between a thin ground cover and a real crawl space vapor barrier, and why thickness and sealing matter.
- Crawl Space Encapsulation: Sealing the crawl space off from the ground and the outdoors, step by step, and what it does for your home's air, structure and energy use.
- Crawl Space Dehumidifiers: Why a sealed crawl space still needs humidity control, and what separates a real crawl space unit from a portable.
- Sealed Vents and Access Doors: Closing foundation vents and fitting a tight, insulated access door keeps humid air, cold air and pests out.
- Crawl Space Support Jacks: Adjustable steel supports on solid footings that replace failing piers and lift sagging floors back toward level.
Concrete leveling
- Foam Concrete Lifting: Also called polyjacking: a lightweight expanding foam injected under a slab through small holes to fill voids and lift it back to level.
- Slabjacking: A time-tested method that pumps a cement-based slurry under sunken concrete to fill voids and lift the slab with immediate, visible results.
- Concrete Joint and Crack Sealing: Sealing joints and cracks after leveling keeps water out from under the slab, so it stays level.