Local foundation and crawl space specialists in Kentucky, Tennessee and the Southeast Call 800-800-2220™
myfoundation.solutions

Concrete Crack Injection

Epoxy and polyurethane injection to seal leaking cracks in poured concrete walls, and when it's the right fix.

What it is

Crack injection seals a crack in a poured concrete wall from the inside out. Injection ports are set along the crack, the surface is sealed, and a liquid resin is pumped in under low pressure until it fills the crack through the full thickness of the wall.

Epoxy or polyurethane?

  • Epoxy cures hard and bonds the concrete back together structurally. Best for cracks that are dry or nearly dry and have stopped moving.
  • Polyurethane foams and stays flexible. Best for actively leaking cracks and cracks that may open and close slightly with the seasons.

Where it’s the right fix

  • Shrinkage cracks in poured concrete walls that leak water
  • Cracks in walls that have been stabilized, as the final step
  • Cracks around pipe penetrations

Where it isn’t

  • Block walls: the hollow cores let resin spread instead of filling the crack. Drainage is the better water fix.
  • Walls still moving: injection won’t stop settling or bowing. The crack will reopen beside the repair. Stabilize first with piers or anchors.

The longer it waits, the bigger the repair.

Get a free estimate from a local specialist.

Get a free estimate