How wall anchors work
A wall anchor system has three parts: a steel plate on the inside face of the basement wall, a buried earth anchor plate in stable soil out in the yard, and a galvanized steel rod connecting the two through the wall. Once tightened, the system uses the stable soil out in the yard to resist the pressure pushing the wall in.
The installation
- A small hole is dug in the yard about 10 to 12 feet from the wall at each anchor location.
- A hole is drilled through the basement wall.
- A rod is driven from inside out to the excavation.
- The earth anchor is attached to the rod in the yard, and the hole is backfilled.
- The wall plate is installed inside and the rod tightened.
Straightening over time
Anchors can be tightened periodically, especially when the soil is dry and pressure is lowest, to gradually pull the wall back toward plumb. Not every wall can be fully straightened, but most can be stopped and improved.
Where they fit
- Bowing or leaning poured or block basement walls
- Yards with room for the anchors outside, clear of utilities and neighbors’ property
Limits
Anchors need clear yard space. Where a driveway, neighboring house or utilities are in the way, helical tiebacks or wall braces are used instead.
Field note from Shaun Miller: Most of the bowing walls we see in our area are block walls holding back wet clay. Anchors stop the movement, but the drainage and gutters have to be fixed at the same time, or the clay keeps pushing.