How it works
An interior drainage system is a perforated drain pipe installed around the inside perimeter of the basement, below the floor and beside the footing. It intercepts water where it enters, at the wall-floor joint and through the walls, and carries it to a sump pit, where a pump sends it outside. Because it relieves the water pressure instead of fighting it, it keeps working when patches and sealers fail.
The installation
- A narrow strip of the floor is removed along the walls.
- A trench is dug down beside the footing.
- Clean, washed drainage stone is placed, and the perforated drain set in it. Clean, coarse stone, such as #57, lets water flow freely; finer stone can clog the system over time.
- On block walls, the cores are often drilled so water trapped inside the block can drain.
- A wall flange or drainage membrane directs wall seepage into the drain.
- The drain is connected to a sump pit, and the floor is patched with new concrete.
Strengths
- Installed from inside, so no excavation of the yard or landscaping
- Works year-round, in any weather
- Handles water from walls, the wall-floor joint and under the floor
Questions homeowners ask
Is exterior waterproofing better?
Exterior excavation and membranes can work well, but they’re much more expensive and disruptive, and they don’t address water coming up under the floor. Interior drainage is the most common fix for existing homes.
Can I finish my basement afterward?
Yes. That’s one of the best reasons to do it first.
Field note from Shaun Miller: Ask what stone goes in the trench. We use clean, washed #57 stone. Smaller #8 gravel packs into the drain holes and the holes in the sump liner, and the system slowly clogs. It’s one of the most common shortcuts we find when we’re called to fix someone else’s system.