Hydrostatic pressure
When the soil around your foundation fills with water, that water presses against the walls and pushes up under the floor. The deeper the basement, the more pressure. Concrete and block are porous, so water forces its way through cracks, through the block itself, and especially through the cove joint where the wall meets the floor.
The clay bowl effect
When a house is built, a hole is dug for the foundation, and after the walls are up, loose soil is pushed back around them. That backfill is fluffier and more absorbent than the undisturbed clay around it. The result is a bowl of loose soil around your basement that collects water from the surrounding yard and holds it right against your walls.
Gutters, downspouts and grading
- An inch of rain on an average roof produces well over a thousand gallons of water. Clogged gutters or short downspouts drop it right at the foundation.
- Soil that has settled next to the house often slopes toward the foundation instead of away from it.
- Patios, walks and driveways that tilt toward the house funnel water to the wall.
High water table and springs
Some lots have groundwater that rises close to the basement floor in wet seasons. Karst areas can have springs and underground water paths that show up in unexpected places.
Cracks and the cove joint
The floor is poured after the footing and walls, so the joint between them is never sealed. It’s the most common place for water to enter. Foundation cracks, pipe penetrations and window wells are others.
Condensation
Not all moisture comes from outside. Warm, humid summer air meets cool basement walls and condenses, like a cold glass of iced tea. Dehumidification solves this; drainage doesn’t.
Plumbing
A leaking water heater, washer hose or supply line can look like a groundwater problem. Rule these out first.