Local foundation and crawl space specialists in Kentucky, Tennessee and the Southeast Call 800-800-2220™
myfoundation.solutions

Helical Tiebacks

Screw-type anchors installed through the wall from inside the basement, with no digging in the yard, to restrain walls under soil pressure.

How tiebacks work

A helical tieback is a steel shaft with helix plates, like a helical pier turned sideways. It’s screwed horizontally through the basement wall and out into the soil behind it until it reaches stable ground and the target torque. A bracket on the inside of the wall connects it, holding the wall against the soil pressure.

When tiebacks are the right choice

  • No room in the yard for traditional anchors: driveways, patios, close neighbors
  • Utilities in the way of excavation
  • Retaining walls and other walls that need to be tied back into the earth

The installation

  1. A hole is drilled through the wall at each location.
  2. The tieback is screwed out into the soil at a slight downward angle, with torque recorded.
  3. A wall bracket is attached and the anchor tensioned.

Strengths and limits

  • Strengths: installed from inside, no yard excavation, immediate capacity, verified by torque.
  • Limits: rocky soil can block installation. Walls that need major straightening may need other methods first.

The longer it waits, the bigger the repair.

Get a free estimate from a local specialist.

Get a free estimate